DIN EN 287-1_05-2004_en | International Organization For Standardization | Welding

of 37

Please download to get full document.

View again

All materials on our website are shared by users. If you have any questions about copyright issues, please report us to resolve them. We are always happy to assist you.
37 pages
0 downs
D EUTSCHE NORM May 2004 DIN EN 287-1 ICS 25.160.10 { Supersedes August 1997 edition. Qualification test of welders – Fusion welding Part 1: Steels English version of DIN EN 287-1 Prüfung von Schweißern – Schmelzschweißen –Teil 1: Stähle European Standard EN 287-1 : 2004 has the status of a DIN Standard. A comma is used as the decimal marker. National foreword This standard has been prepared by CEN/TC 121 ‘Welding’ (Secretariat: Germany). The responsible German body involved in its prepar
  DEUTSCHE NORM May 2004 DINEN 287-1 { ©No part of this standard may be reproduced without the prior permission of DINDeutsches Institut für Normung e.V. , Berlin. Beuth Verlag GmbH , 10772Berlin, Germany,has the exclusive right of sale for German Standards (DIN-Normen) .English price group16www.din.dewww.beuth.de08.049567598 Continued overleaf.Document comprises 37 pages. Qualification test of welders – Fusion welding Part 1: SteelsEnglish version of DIN EN 287-1 Prüfung von Schweißern – Schmelzschweißen –Teil 1: Stähle European Standard EN 287-1 : 2004 has the status of a DIN Standard.  A comma is used as the decimal marker. ICS 25.160.10 National foreword This standard has been prepared by CEN/TC 121 ‘Welding’ (Secretariat: Germany).The responsible German body involved in its preparation was the Normenausschuss Schweißtechnik  (Welding Standards Committee), Technical Committee  Abnahmefestlegungen für das Personal für Schweißen und verwandte Verfahren . General The aim of this standard is to ensure that the qualification testing of welders is performed under the sameconditions and using the same types of test piece, irrespective of where such tests are held. By passing thetest as specified here, a welder demonstrates that he is adequately qualified to be employed for the fusionwelding of steel in industry within the scope specified in this standard.The standard thus provides a basis for mutual recognition of welder qualification test certificates by thebodies responsible for the various fields of application. Examiners and examining bodies This standard does not provide information on examiners and examining bodies involved in the qualificationtesting of welders since these are indicated in the relevant legal regulations, specialized standards, codesof practice, or technical delivery conditions.Currently, the following persons and bodies are recognized as being competent for the qualification testingof welders:a)welding training and testing institutes;b)welding training institutes;c)examination and certification boards of the Deutscher Verband für Schweißen und verwandteVerfahren e.V. (German Welding Society);d)technical inspection associations (  TÜV   );e) Germanischer Lloyd  ;f) Lloyd’s Register EMEA ;Supersedes August 1997 edition.      N  o  r  m  e  n  -   D  o  w  n   l  o  a   d  -   B  e  u   t   h  -   T    Ü   V   S   ü   d   d  e  u   t  s  c   h   l  a  n   d   H  o   l   d   i  n  g   A   G   V  e  r   l  a  g  -   K   d   N  r .   2   2   9   8   1   8  -   L   f   N  r .   2   5   3   4   1   6   5   0   0   1  -   2   0   0   4  -   0   9  -   2   7   0   7  :   5   5  g)testing and inspection bodies accredited by federal or Land  authorities;h)welding engineers, accredited on the basis of legal regulations, codes of practice or standards;i)examiners or examining bodies, accredited on the basis of European codes of practice, legal regulationsor standards, or in accordance with DIN EN ISO/IEC 17024. Test certificates This standard does not invalidate existing qualification test certificates issued on the basis of the 1997 editionof DIN EN 287-1. On the expiry of these certificates new certificates have to be issued, which may involve thewelding of further test pieces by the welder concerned (since the scope of the new certificates differs somewhatfrom those issued hitherto on the basis of DIN EN 287-1). Job knowledge test Welders who apply for approval in Germany are required to take the job knowledge test detailed in Annex C.Welders who are employed in Germany and have not passed such a test will be at least required to demonstratethat they have some knowledge in occupational safety and accident prevention.DINV1738 and DINISO857-1 are the standards corresponding to CEN Report ISO 15608 and InternationalStandard ISO 857-1, respectively, referred to in clause 2 of the EN.  Amendments This standard differs from the August 1997 edition in that it has been completely revised. Previous editions DIN 8560-1: 1959-01; DIN 8560: 1968-08, 1978-01, 1982-05; DIN EN 287-1: 1992-04, 1997-08. National Annex NA  Standard referred to (and not included in Normative   references and Bibliography   )DIN V 1738Welding – Guidelines for a grouping system of materials for welding purposes(ISO/TR15608:2000)Page2DIN EN 287-1 : 2004-05      N  o  r  m  e  n  -   D  o  w  n   l  o  a   d  -   B  e  u   t   h  -   T    Ü   V   S   ü   d   d  e  u   t  s  c   h   l  a  n   d   H  o   l   d   i  n  g   A   G   V  e  r   l  a  g  -   K   d   N  r .   2   2   9   8   1   8  -   L   f   N  r .   2   5   3   4   1   6   5   0   0   1  -   2   0   0   4  -   0   9  -   2   7   0   7  :   5   5  English version ICS 25.160.10Supersedes EN 287-1 : 1992. Management Centre: rue de Stassart 36, B-1050 Brussels European Committee for StandardizationComit é Europ é en de NormalisationEurop ä isches Komitee f ü r Normung ©2004.CEN –  All rights of exploitation in any form and by any meansreserved worldwide for CEN national members.Ref. No. EN287-1:2004E É preuve de qualification dessoudeurs – Soudage par fusion – Partie 1: AciersPr ü fung von Schwei ß ern – Schmelz-schwei ß en – Teil 1: St ä hleThis European Standard was approved by CEN on 2004-01-02.CEN members are bound to comply with the CEN/CENELEC Internal Regulationswhich stipulate the conditions for giving this European Standard the status of anational standard without any alteration.Up-to-date lists and bibliographical references concerning such nationalstandards may be obtained on application to the Management Centre or to anyCEN member.The European Standards exist in three official versions (English, French, German). A version in any other language made by translation under the responsibility of aCEN member into its own language and notified to the Management Centre hasthe same status as the official versions.CEN members are the national standards bodies of Austria, Belgium, Cyprus, theCzech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary,Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands,Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland, andthe United Kingdom. ÈÉË EN287-1 March 2004 Qualification test of welders – Fusion welding Part 1: Steels      N  o  r  m  e  n  -   D  o  w  n   l  o  a   d  -   B  e  u   t   h  -   T    Ü   V   S   ü   d   d  e  u   t  s  c   h   l  a  n   d   H  o   l   d   i  n  g   A   G   V  e  r   l  a  g  -   K   d   N  r .   2   2   9   8   1   8  -   L   f   N  r .   2   5   3   4   1   6   5   0   0   1  -   2   0   0   4  -   0   9  -   2   7   0   7  :   5   5  Page2EN 287-1 : 2004 3344455567778899101112131313171818232324242424242425262731343535      N  o  r  m  e  n  -   D  o  w  n   l  o  a   d  -   B  e  u   t   h  -   T    Ü   V   S   ü   d   d  e  u   t  s  c   h   l  a  n   d   H  o   l   d   i  n  g   A   G   V  e  r   l  a  g  -   K   d   N  r .   2   2   9   8   1   8  -   L   f   N  r .   2   5   3   4   1   6   5   0   0   1  -   2   0   0   4  -   0   9  -   2   7   0   7  :   5   5
Related Search
Similar documents
View more...
We Need Your Support
Thank you for visiting our website and your interest in our free products and services. We are nonprofit website to share and download documents. To the running of this website, we need your help to support us.

Thanks to everyone for your continued support.

No, Thanks