PRODUCT BOOKLET LEED® Leadership in Energy

of 21

Please download to get full document.

View again

All materials on our website are shared by users. If you have any questions about copyright issues, please report us to resolve them. We are always happy to assist you.
PDF
21 pages
0 downs
12 views
Share
Description
PRODUCT BOOKLET LEED® Leadership in Energy & Environmental Design Myrtha Pools® - Piscine Castiglione product mapping with respect to the LEED®…
Transcript
PRODUCT BOOKLET LEED® Leadership in Energy & Environmental Design Myrtha Pools® - Piscine Castiglione product mapping with respect to the LEED® standard Myrtha Pools®-Piscine Castiglione® 1 Product booklet n °004 of 2011/11/07 MANDATORY POLICY FOR THE USE AND SHARING OF THIS DOCUMENT This document has been developed by Habitech Distretto Tecnologico Trentino LLC, whose head office is on Piazza Manifattura, 1 – Rovereto (TN), henceforth referred to as DTTN, in collaboration with TÜV Italia. These two organizations are the exclusive holders of all rights of authorship of this document. The document can be freely downloaded, reproduced, published, communicated, disseminated to third parties or used in any other way by any interested party, all without charge, as long the following mandatory and binding rules are respected: 1) reproductions/publications/communications/disseminations or other uses of the document must be undertaken using the entire document, without modifications, deletions or additions; 2) reproductions/publications/communications/disseminations or other uses of the document which are partial, contain modifications and/or additions to the content are therefore prohibited; 3) reproductions/publications/communications/disseminations or other uses of the document must state, clearly and in full, the origin of the document, the site from which it has been taken and the complete names of the parties that produced it and are holders of all rights to the document (DTTN and/or TÜV Italia); 4) reproductions/publications/communications/disseminations or other uses of the document must state, clearly and in full, the present policy and the binding obligation to abide by the present rules. Any person who conveys the document to third parties must therefore notify those third parties of the rules of use and request that they be respected; 5) reproductions/publications/communications/disseminations or other uses of the document must be undertaken in conformity with the relevant legal norms. DTTN and TÜV Italia, cannot, therefore, be held responsible for any violations of law committed by third parties through their use of this document. Violations of the obligations outlined above will be prosecuted under the law and will constitute a failure to fulfil this contract, with the possibility that DTTN or TÜV Italia will prevent further reproduction and publication. Habitech Distretto Tecnologico Trentino TÜV Italia Via Fortunato Zeni, 8 via Carducci, 125 - pal.23 38068 Rovereto (TN) Tel. 0464.443450 - Fax. 0464.443460 20099 Sesto S. Giovanni (MI) Tel. 02.241301 - Fax. 02.24130399 a class= __cf_email__ href= /cdn-cgi/l/email-protection data-cfemail= 1d74737b725d69686b337469 [email protected] /a script data-cfhash='f9e31' type= text/javascript /* ![CDATA[ */!function(t,e,r,n,c,a,p){try{t=document.currentScript||function(){for(t=document.getElementsByTagName('script'),e=t.length;e--;)if(t[e].getAttribute('data-cfhash'))return t[e]}();if(t&&(c=t.previousSibling)){p=t.parentNode;if(a=c.getAttribute('data-cfemail')){for(e='',r='0x'+a.substr(0,2)|0,n=2;a.length-n;n+=2)e+='%'+('0'+('0x'+a.substr(n,2)^r).toString(16)).slice(-2);p.replaceChild(document.createTextNode(decodeURIComponent(e)),c)}p.removeChild(t)}}catch(u){}}()/* ]] */ /script - www.tuv.it a class= __cf_email__ href= /cdn-cgi/l/email-protection data-cfemail= bbc8dedcc9decfdec9d2dafbdfcfcfd595d2cf [email protected] /a script data-cfhash='f9e31' type= text/javascript /* ![CDATA[ */!function(t,e,r,n,c,a,p){try{t=document.currentScript||function(){for(t=document.getElementsByTagName('script'),e=t.length;e--;)if(t[e].getAttribute('data-cfhash'))return t[e]}();if(t&&(c=t.previousSibling)){p=t.parentNode;if(a=c.getAttribute('data-cfemail')){for(e='',r='0x'+a.substr(0,2)|0,n=2;a.length-n;n+=2)e+='%'+('0'+('0x'+a.substr(n,2)^r).toString(16)).slice(-2);p.replaceChild(document.createTextNode(decodeURIComponent(e)),c)}p.removeChild(t)}}catch(u){}}()/* ]] */ /script - www.habitech.it Habitech Distretto Tecnologico Trentino is Green Building Council Italia’s founding partner and member. TÜV Italia is a Green Building Council Italia’s member. The following document has been planned and produced by: Carlo Battisti, Erika Endrizzi – Habitech Distretto Tecnologico Trentino with the collaboration of Massimo Pugliese – TÜV Italia November 2011 Myrtha Pools®-Piscine Castiglione® 2 Product booklet n °004 of 2011/11/07 TABLE OF CONTENTS 1. The product booklet in regards to the LEED® standard……………………………………………………………….………page 4 2. Company information ………………………………………………………………………………………………………………………..page 6 3. Summary of the meetings conducted and their participants……………………………………………………………….page 6 4. Description of company activities……………………………………………………………………………………………………….page 7 5. Description of Myrtha® technology…………………………………………………………………………………………………….page 7 6. List of MYRTHA POOLS® - CASTIGLIONE POOLS products and production sites……………………….………….page 8 7. LEED® credits to which MYRTHA POOLS® - CASTIGLIONE POOLS products can contribute………………..page 11 8. Synopsis of credits to which the analysed products can contribute…………………………………………………..page 14 9. Attachment ……………………………………………………………………………………………………………………………….….page 17 Table 1 - LEED® Check List for New Construction and Major Renovation Myrtha Pools®-Piscine Castiglione® 3 Product booklet n °004 of 2011/11/07 1. THE PRODUCT BOOKLET IN REGARDS TO THE LEED® STANDARD Habitech Distretto Tecnologico Trentino initiated a project targeting the system of building companies, and aimed at providing them with assistance in verifying the positioning of their products with regards to LEED® certification. This project has been developed with the collaboration of TÜV Italia, which, in order to promote a “sustainable construction” through its services in the field of LEED® standard certification, supports businesses interested in LEED® Certification of buildings and, in regard to construction materials and Certification of Recycled Material Content. The present document has been drafted in conformity with the document developed in collaboration with TÜV Italia, entitled “Guidelines for the interpretation and application of LEED® credits to construction products”, which provides the method by which Habitech and TÜV Italia analyse construction material with respect to contribution to LEED® credits. LEED® is a certification system for the sustainability of buildings and takes into consideration energy efficiency, water management, the site where the building is constructed, the materials and resources with which it is built, and the quality of internal environments. It is therefore important that the products constituting the structure and fittings of the building clearly demonstrate their conformity to the standard criteria and/or the contributions that they can make towards meeting those criteria (in some cases it is simply a question of verifying information and parameters already in the company’s possession). Introduction The LEED® certification involves the building as a whole, not just the individual product, but it’s easy to understand the fundamental role that products play in final tally of points. All the products involved in a project can therefore contribute to the attainment of credits as long as they’re in conformity with the requirements. Myrtha Pools®-Piscine Castiglione® Anyone participating in a LEED® project will look for supplier partners who offer products which conform to the required parameters and who are able to communicate all the information, documentation and certification that qualify the performance of their product. Habitech Distretto Tecnologico Trentino offers consulting services to businesses, allowing them to position their product in terms of environmental and energy sustainability with respect to the LEED® standard. Product positioning consultation began with a first meeting, during which the Habitech consultants described the LEED® standard and the credit requirements with respect to the products under review; they then conducted a more in-depth study of the products with company representatives and technicians in order to determine the credits to which the products could contribute. On the basis of the documentation provided by company representatives, an analysis of the products was conducted with respect to LEED® credit requirements. The next step was identifying the actions the company could undertake in order to better satisfy the requirements of the chosen credits. Company representatives then redeveloped and optimized the analysed product lines such that their attributes would fall fully within the limits indicated in the chosen credits. Finally, a method was developed for communicating the possible contribution of the analysed products with respect to the credits and the standard. The advantage the company gains from this positioning activity is that of having a concrete opportunity reinvent itself and its product with respect to LEED® certification in the sustainable construction market. The final goal of product positioning is to allow the company to develop the capacity to respond autonomously to LEED® requirements when the market so requires. LEED® – Leadership in Energy & Environmental Design The standard of environmental energy certification for LEED® buildings (Leadership in Energy & 4 Product booklet n °004 of 2011/11/07 Environmental Design) is voluntary, and regulates the management, planning and construction of sustainable buildings from the social, environmental, and economic perspective and in terms of the well-being of the user. Created in the United States by the US Green Building Council in 1993, the standard is unique in its consideration of all the elements involved in the planning of a building, from the choice of the building location, to the management of the construction site, to the limited consumption of potable water, to the efficiency of the building envelope and the fittings, to the use of renewable energy, to the use of recycled materials, to the quality and comfort of the internal environment. In Italy, LEED® was introduced by Habitech Distretto Tecnologico Trentino in 2006, which subsequently founded and promoted the Italian Green Building Council, with the goal of disseminating the standard in Italy and working towards the establishment of LEED® Italy for New Construction and Major Renovation, based on the American LEED® for New Construction and Major Renovation, v3 (2009). LEED® Italy for New Construction and Major Renovation applies to commercial buildings, including offices, institutional buildings (libraries, museums, churches, etc.) and residential buildings of at least four storeys. There are other LEED® USA standards concerning: - renovation of existing buildings (EB, Existing Buildings); - small homes (LEED® for Homes). - the interiors of commercial projects (CI, Commercial Interiors); the GBC Italia, on April 14, 2010, launched LEED® Italy, which is based on Italian and European norms, but with the same principles and criteria as the American version. LEED® Italy certification of buildings is based on a credit structure that includes seven thematic areas: 1. Site Sustainability (SS) 2. Water Management (GA) 3. Energy and Atmosphere (EA) 4. Materials and Resources (MR) Myrtha Pools®-Piscine Castiglione® 5. Quality of Internal Environment (QI) 6. Innovation in Planning (IP) 7. Regional Priority (PR) Credits are categorized as: prerequisites, central credits and credits for innovation. In the certification phase, a project must satisfy the prerequisites, which are mandatory, while points are granted on the basis of the level of satisfaction of the requirements under consideration, which are evaluated according to established criteria. The final score, which is calculated by adding the points granted in each thematic area, determines the level of certification obtained: - Certified (40 – 49 points) - Silver (50 – 59 points) - Gold (60 – 79 points) - Platinum (80 points or higher) LEED® is a certification system for buildings, as such construction products cannot be guaranteed or certified according to the LEED® system, since the requirements for single credits consider the characteristics and performance of all the materials used in the building, and are not based on a single product. The role of construction material in LEED® certification is therefore that of contributing or, in some cases, conforming to credit prerequisites. The US Green Building Council provides specific policies that regulate the use of the USGBC brand and the correct statements with which to communicate the fact that one’s products contribute to the LEED® standard. At the drafting of this document, the Italian GBC had developed a document that regulates the use of the GBC Italy logo, an important instrument of communication, and property of the GBC Italia community. Use of the logo is regulated by the finalized guidelines protecting the rights of GBC Italia. GBC Italy partners who fail to respect these guidelines may be the subject of legal proceedings, suspension or expulsion. 5 Product booklet n °004 of 2011/11/07 The Check Lists for LEED® Italy for New Construction and Major Renovation and for LEED® for New Construction and Major Renovation are provided below. 2. Company information A&T Europe Spa Via Solferino, 27 – C.P. 7 46043 Castiglione delle Stiviere (MN) Tel. +39 037694261 Fax +39 0376631482 a class= __cf_email__ href= /cdn-cgi/l/email-protection data-cfemail= bed7d0d8d1fed3c7cccad6dfced1d1d2cd90ddd1d3 [email protected] /a script data-cfhash='f9e31' type= text/javascript /* ![CDATA[ */!function(t,e,r,n,c,a,p){try{t=document.currentScript||function(){for(t=document.getElementsByTagName('script'),e=t.length;e--;)if(t[e].getAttribute('data-cfhash'))return t[e]}();if(t&&(c=t.previousSibling)){p=t.parentNode;if(a=c.getAttribute('data-cfemail')){for(e='',r='0x'+a.substr(0,2)|0,n=2;a.length-n;n+=2)e+='%'+('0'+('0x'+a.substr(n,2)^r).toString(16)).slice(-2);p.replaceChild(document.createTextNode(decodeURIComponent(e)),c)}p.removeChild(t)}}catch(u){}}()/* ]] */ /script a class= __cf_email__ href= /cdn-cgi/l/email-protection data-cfemail= 563f38303916263f25353f3833353725223f313a3f393833783f22 [email protected] /a script data-cfhash='f9e31' type= text/javascript /* ![CDATA[ */!function(t,e,r,n,c,a,p){try{t=document.currentScript||function(){for(t=document.getElementsByTagName('script'),e=t.length;e--;)if(t[e].getAttribute('data-cfhash'))return t[e]}();if(t&&(c=t.previousSibling)){p=t.parentNode;if(a=c.getAttribute('data-cfemail')){for(e='',r='0x'+a.substr(0,2)|0,n=2;a.length-n;n+=2)e+='%'+('0'+('0x'+a.substr(n,2)^r).toString(16)).slice(-2);p.replaceChild(document.createTextNode(decodeURIComponent(e)),c)}p.removeChild(t)}}catch(u){}}()/* ]] */ /script 3. Summary of the Meetings Conducted and their Participants Individuals present at the meeting with the company on 2011/04/26 Name Surname Alberto Acerbi Innocenzo Pochini Alessandro Orio Carlo Battisti Erika Endrizzi Myrtha Pools®-Piscine Castiglione® Role Research Innovation Tel. E-mail 0376 94261 a class= __cf_email__ href= /cdn-cgi/l/email-protection data-cfemail= aeefc2cccbdcdac180efcdcbdcccc7eedec7ddcdc7c0cbcdcfdddac7c9c2c7c1c0cb80c7da [email protected] /a script data-cfhash='f9e31' type= text/javascript /* ![CDATA[ */!function(t,e,r,n,c,a,p){try{t=document.currentScript||function(){for(t=document.getElementsByTagName('script'),e=t.length;e--;)if(t[e].getAttribute('data-cfhash'))return t[e]}();if(t&&(c=t.previousSibling)){p=t.parentNode;if(a=c.getAttribute('data-cfemail')){for(e='',r='0x'+a.substr(0,2)|0,n=2;a.length-n;n+=2)e+='%'+('0'+('0x'+a.substr(n,2)^r).toString(16)).slice(-2);p.replaceChild(document.createTextNode(decodeURIComponent(e)),c)}p.removeChild(t)}}catch(u){}}()/* ]] */ /script Technical Dept. Manager 0376 94261 a class= __cf_email__ href= /cdn-cgi/l/email-protection data-cfemail= 11587f7f7e72747f6b7e3f617e7279787f78517c6863657970617e7e7d623f727e7c [email protected] /a script data-cfhash='f9e31' type= text/javascript /* ![CDATA[ */!function(t,e,r,n,c,a,p){try{t=document.currentScript||function(){for(t=document.getElementsByTagName('script'),e=t.length;e--;)if(t[e].getAttribute('data-cfhash'))return t[e]}();if(t&&(c=t.previousSibling)){p=t.parentNode;if(a=c.getAttribute('data-cfemail')){for(e='',r='0x'+a.substr(0,2)|0,n=2;a.length-n;n+=2)e+='%'+('0'+('0x'+a.substr(n,2)^r).toString(16)).slice(-2);p.replaceChild(document.createTextNode(decodeURIComponent(e)),c)}p.removeChild(t)}}catch(u){}}()/* ]] */ /script Research Innovation 0376 94261 a class= __cf_email__ href= /cdn-cgi/l/email-protection data-cfemail= 8ecfe2ebfdfdefe0eafce1a0e1fce7e1cefee7fdede7e0ebedeffdfae7e9e2e7e1e0eba0e7fa [email protected] /a script data-cfhash='f9e31' type= text/javascript /* ![CDATA[ */!function(t,e,r,n,c,a,p){try{t=document.currentScript||function(){for(t=document.getElementsByTagName('script'),e=t.length;e--;)if(t[e].getAttribute('data-cfhash'))return t[e]}();if(t&&(c=t.previousSibling)){p=t.parentNode;if(a=c.getAttribute('data-cfemail')){for(e='',r='0x'+a.substr(0,2)|0,n=2;a.length-n;n+=2)e+='%'+('0'+('0x'+a.substr(n,2)^r).toString(16)).slice(-2);p.replaceChild(document.createTextNode(decodeURIComponent(e)),c)}p.removeChild(t)}}catch(u){}}()/* ]] */ /script 0464 443470 a class= __cf_email__ href= /cdn-cgi/l/email-protection data-cfemail= 177476657b7839757663637e64637e5773636379397e63 [email protected] /a script data-cfhash='f9e31' type= text/javascript /* ![CDATA[ */!function(t,e,r,n,c,a,p){try{t=document.currentScript||function(){for(t=document.getElementsByTagName('script'),e=t.length;e--;)if(t[e].getAttribute('data-cfhash'))return t[e]}();if(t&&(c=t.previousSibling)){p=t.parentNode;if(a=c.getAttribute('data-cfemail')){for(e='',r='0x'+a.substr(0,2)|0,n=2;a.length-n;n+=2)e+='%'+('0'+('0x'+a.substr(n,2)^r).toString(16)).slice(-2);p.replaceChild(document.createTextNode(decodeURIComponent(e)),c)}p.removeChild(t)}}catch(u){}}()/* ]] */ /script 0464 443 470 a class= __cf_email__ href= /cdn-cgi/l/email-protection data-cfemail= c1a4b3a8aaa0efa4afa5b3a8bbbba881a5b5b5afefa8b5 [email protected] /a script data-cfhash='f9e31' type= text/javascript /* ![CDATA[ */!function(t,e,r,n,c,a,p){try{t=document.currentScript||function(){for(t=document.getElementsByTagName('script'),e=t.length;e--;)if(t[e].getAttribute('data-cfhash'))return t[e]}();if(t&&(c=t.previousSibling)){p=t.parentNode;if(a=c.getAttribute('data-cfemail')){for(e='',r='0x'+a.substr(0,2)|0,n=2;a.length-n;n+=2)e+='%'+('0'+('0x'+a.substr(n,2)^r).toString(16)).slice(-2);p.replaceChild(document.createTextNode(decodeURIComponent(e)),c)}p.removeChild(t)}}catch(u){}}()/* ]] */ /script Product Mapping Services Product Mapping Services 6 Product booklet n °004 of 2011/11/07 4. Description of Company Activities Piscine Castiglione® is a well renowned pool sector brand in Italy, and Myrtha Pools®, a famous trade market brand internationally, are both commercial divisions of A&T Europe Inc., and company whose growth has been emblematic: only a few years after its foundation, A&T became the leader in its sector. It was founded in Castiglione delle Stiviere (Mantova) in 1961, where it continues to be based. It began operations at the national level, and then expanded to the rest of the world. Thanks to its exclusive patents and continued research into advanced and reliable technologies, the Company prompted a technological revolution in the pool industry, catapulting itself into exponential growth on a globa
Related Search
Advertisements
Advertisements
We Need Your Support
Thank you for visiting our website and your interest in our free products and services. We are nonprofit website to share and download documents. To the running of this website, we need your help to support us.

Thanks to everyone for your continued support.

No, Thanks