WMS Oled Button Setup

of 8

Please download to get full document.

View again

All materials on our website are shared by users. If you have any questions about copyright issues, please report us to resolve them. We are always happy to assist you.
PDF
8 pages
5 downs
365 views
Share
Description
WMS OLED SETUP PROCEDURE
Tags
Transcript
  WMS OLED BUTTONS WMS USB TEST COMM TOOL V03 07 1) Connect the button Panel 2)   Select [Get WF-HWStrap Info] This will give you the information needed  –   which direction you must go for downloading the firmware.  Note: 2.XX to 3.XX Button Panel first then Buttons 3.XX to 2.XX Buttons first then Button Panel 3.09 to (2.XX or 3.XX) require the boot loader. Refer to WMS OLED button panel firmware V3.09 to V2.03 Downgrade procedure.  3 ) Select Firmware Download 3)   After downloading the firmware, Select Display Image Make sure you select (ALL).   Note; It is possible you may have a button that lost the Display information  –   or if your are using a new button  –   it may not have the display information. Connection it to a game should fix that. (Appears the game send that information to the button) 4)   Select (Get Switch States) This is where you can check each Button  –   insuring that the switch works. When you press the switch  –   The Box will turn Black    Problems you may see Button Panel is at 3.09  –   Buttons A3.03
Related Search
We Need Your Support
Thank you for visiting our website and your interest in our free products and services. We are nonprofit website to share and download documents. To the running of this website, we need your help to support us.

Thanks to everyone for your continued support.

No, Thanks